Produse pentru oscilator electric (9)

Su richiesta progettiamo e realizziamo, in base all’esigenza o alla specifica del Cliente, elettromagneti di alta qualità e specifici per l’utilizzo richiesto. Contattateci per comunicarci le vostre necessità.

Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively. Specific torque [Nm/bar]:4,09 Operating pressure [bar]:280 Nominal torque [Nm]:1145 Swivelling angle [ degrees° ]:120

The ultra-miniature 32.768kHz CXOXULP oscillators use an AT-Cut crystal for tight stability and also have a low current consumption, typically 15µA. A fast start-up time (15ms) and tight frequency stability (±30ppm to ±100ppm) over a wide temperature range. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consumption (typically 15µA) Fast start-up (typically 15ms) Tight Tolerance High Shock Resistance Low Ageing Full military testing available Frequency Range:32.7680kHz Supply Voltage:1.8V to +3.3 Volts ±10% Calibration Tolerance:±25ppm Frequency Stability over Operating Temperature Range Commercial (0° ~ +70°C):±10 to ±50ppm Industrial(-40° ~ +85°C): ±20 to ±100ppm Military Output Load (CMOS):15pF Ageing:±5ppm first year Shock, Survival:5000g, 0.3ms, ½ sine HG: 10,000g, 0.3ms, ½ sine Vibration Survival:20g, 10~2000Hz swept sine Rise and Fall Time:6ns maximum Supply Voltage:-0.3V to 5.0V Storage Temperature:-55° t +125°C Maximum Process Temperature:260°C for 20 seconds

Standardausführung Elektromagnete sind nur nach dem Anlegen einer elektrischen Spannung magnetisch. Wird die Spannung unterbrochen verlieren sie ihre Haftkraft sofort. Sie sind deshalb schaltbar und sehr gut im Maschinen- und Vorrichtungsbau, bei Transport- und für Handlingsysteme einsetzbar. Ihr Nutzen: Haftkraft auf Knopfdruck von 41 bis 8370 N. Hohe Lebensdauer durch vergossene Spule. Blau verchromte Stahltasse. Produkteigenschaften zu Ihrem Vorteil: 100% Einschaltdauer. Anschlußspannung 24 V Gleichsspannung**. Geringe Leistungsaufnahme. Unbeachtlicher Restmagnetismus.(unter 5%) *Angaben beziehen sich auf volle Belegung mit St37 / S235JR(H) bei Mindestmaterialstärke des Werkstücks und Luftspalt Null **230 V AC mit im Anschlussstecker eingebauten Gleichrichter sind gegen Aufpreis ausführbar O180 mm und O250 mm auf Anfrage

Die Bauteile der ETD-Reihe (Economic-Transformer-Design) sind eine Weiterentwicklung der EC-Reihe. Sie wurden speziell für Wandler in Schaltnetzteilen konstruiert. Anwendung: Schaltnetzteilwandler für industrielle Stromversorgung, 1400 W im Gegentaktbetrieb mit Hochfrequenzlitze und Folienwicklung mit statischem Schirm zwischen den Wicklungen mit elektrischer Abschirmung

The small testing machine can be used economically for vibrating small fracture mechanics samples or for quality monitoring of small parts during production. Because of the small footprint, the machine can also be used in "hot cells". With simple additions, the machine can then be operated with a manipulator. Max. Peak value of the bending moment:160 Nm Max. Static bending moment:100 Nm Max dynamic bending moment (+/- 80 Nm):160 Nm Dimensions depending on the add-on module:354 x 662 mm Weight:65 kg control:25 kg connection:230 V / 6 A

Anschlussart: Bauform A - EN 175301-803-A Baubreite:: 30 mm Anschlussart:: Bauform A - EN 175301-803-A Ummantelung:: Thermoplast Spannungstoleranz:: ± 10 % Umgebungstemperatur:: - 20 °C bis + 50 °C Relative Einschaltdauer:: 100 % Thermische Klasse der Isolierstoffe nach DIN VDE 0580:: F Schutzart mit Gerätesteckdose nach EN 60529:: IP 65 Schutzklasse: 1 Aufdruck:: nass magnet (Kundenaufdruck möglich)

Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively. Specific torque [Nm/bar]:49,17 Operating pressure [bar]:280 Nominal torque [Nm]:13768 Swivelling angle [ degrees° ]:120

A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. This part has been revised, for new designs see EM572T. A miniature 4 pad SMD TCXO. Stability from ±1ppm -30°~+75°C. HCMOS square wave output. Wide frequency range. RoHS compliant. Industry-standard SMD package Low phase noise RoHS compliant This part has been revised, for new designs see EM572T Product Code TCXO:EM62K VCTCXO: VEM62K Frequency Range:12.8MHz to 26.0MHz Output Waveform:HCMOS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:12.8, 13.0, 14.4, 15.36, 16.0, 16.384, 16.8, 19.2, 19.44, 19.68, 20.0 and 26.0MHz Frequency Stability vs. Temperature See table vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±1.0 ppm max. ±10% change vs. Load Change Supply Voltage:+2.8, 3.0 or 3.3 Volts Rise and Fall Times:4ns typical with 15pF load Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Output Load:15pF Fanout (drive capability):12mA typical, 17mA max.